| Process
Name |
Process
Type |
Temp. Range |
Application
Examples (more) |
Special
Features |
|
|
Patch. Place
patch on fastener.
|
-100ºF
to 400ºF
-73ºC to 204ºC
|
Aircraft brackets
Avionics systems
Hospital beds
Medical Imaging Systems
Hydraulic digger derricks
|
High
temperature patch. High reusability.
|
|
|
Strip. Cut
a small strip into bolt's longitudinal axis. Fill strip
with material.
|
-450°F
to +1200°F
-268°C to + 649°C
|
Pressure
regulating industrial sensors and controls
Airplane fuel systems
Neonatal monitoring systems
Lawn & garden tools
|
Material
can be nylon, Kel-F® or other material per temperature
and torque needs.
|
|
Pellet. Drill
a hole. Fill hole with material.
|
-450°F
to +500°F
-268°C to + 260°C
|
Pressure
regulating industrial sensors and controls
Airplane fuel systems
Neonatal monitoring systems
Lawn & garden tools
|
Material
can be nylon, Kel-F® or other material per temperature
and torque needs.
|
|
|
2
locking surfaces. Uses Vespel® inserts.
|
-450°F
to +500°F
-268°C to + 260°C
|
Airborne
turboprop engines
Ground-based turbines
Commercial and military aircraft braking
systems
Auxiliary power units
Rapid transit and rail subsystems
|
Up
to 15 reuses. Vespel® material for locking element.
2 locking surfaces.
|
|
|
Pin. Outer
diameter of pin extends above root diameter of external
threads and below minor diameter of internal threads
|
to
1200º F (649°C)
|
Airborne
turboprop engines
Ground-based turbines
Commercial and military aircraft braking
systems
Auxiliary power units
Rapid transit and rail subsystems
|
Wide
range of locking materials available.
|
|
|
All
metal. Fastener forms its own locking element.
No additional locking element material needed.
|
-400°F
to +1200°F
-240°C to + 649°C
|
Airborne
turboprop engines
Ground-based turbines
Commercial and military aircraft braking
systems
Auxiliary power units
Rapid transit and rail subsystems
|
Temperature
range limited only by bolt material.
|
|
|
Pre-applied
adhesive. During assembly, Dri-Loc is activated
releasing anaerobic adhesive which locks parts securely.
|
-65°F
to +400°F
-54°C to + 204°C
|
Auto
shock absorber leveling systems
Hospital beds
Hospital IV stands
|
Harden
in the absence of air on ferrous and nonferrous metals
without primer, activators or heat. Exhibit controlled
lubricity, low on-torque and are dry to touch for ease
of assembly with automatic or hand tools.
|
|
|
Inserts. Provides
self-locking internal thread.
|
-320°F
to +390°F
-196°C to + 199°C
|
Soft
materials, such as aluminum, magnesium and plastics
|
Additional
joint strength, self-locking internal threads, and
wear-resistant internal threads in soft materials.
|
|
|
Self-sealing. O-rings
are positioned under the head in a precision-engineered
groove.
|
-75°F
to +450°F
-59°C to + 232°C
|
Motors
Cabinets and enclosures
Sensors and instrumentation
Internal combustion engines
Gear pumps
Fuel tanks
Transmissions
Gear boxes
Air cylinders
Pressure gauges
Computer disk drives
Motion control valves
Missile tank
Wet wings
|
Positive
Sealing-Pressure and Vacuum
Cold-Formed for Superior Strength and Uniformity
High Reusability
Optional Self-Locking Capability
|
|
|
Pre-applied
thread seal. Highly filled water based liquids.
When dried, they become a resilient, tight clinging
and non-curing sealant
|
-65°F
to +300°F
-54°C to +149°C
|
Rear
Axle Filler Plugs
Bearing Adjuster Nuts
Overhead Fire Sprinklers
Pressure Gauges & Sensors
Cable Connectors
Door Closure Hardware
Brake Fittings
Compressor Pipe Plugs
Shower Heads
Pipe Fittings of all Kinds
Adjustment Screws
Screws for Plastic Assembly
|
|
Dyna-Nut™
|
Self-locking, castellated hex nut, silver plated |
to +800°F; +426°C |
rod end bearings
military vehicles
actuators |
High temperature nut. Corrosion resistant
|
