VIBRA-SEAL®
Vibra-Seal® Pre-Applied Coating Type
-65°F to +300°F
Non-Curing — Stays Flexible
Reusable Up to 5 Times
Inhibits Corrosion — Excellent Solvent Resistance
503, 516, 517, 503HV
Vibra Seal® Pre-applied Thread Sealant is a tough, non-hardening sealant engineered to be preapplied to parts. Vibra- Seal is designed to provide an instant seal on tapered pipe threads against most fluids, fuels and lubricants but can also be used on straight threads. Vibra-Seal performs to the demanding requirements of the automotive, truck and agricultural equipment manufacturers. It provides lubricity superior to Teflon® — at a lower cost!
Available in white or burnt orange colors, Vibra-Seal coatings are highly filled water based liquids that are non-toxic and non-sagging. When dried, they become a resilient, tight clinging and non-curing sealant. Vibra-Seal coated parts also resist loosening because of the prevailing torque created by the coating. Long-Lok can coat entire parts (frequently done on smaller fasteners) or can apply Vibra-Seal sealant to a limited band of threads, which is typical of larger fasteners and fluid fittings.
Typical Applications
• Rear Axle Filler Plugs
• Brake Fittings
• Bearing Adjuster Nuts
• Compressor Pipe Plugs
• Overhead Fire Sprinklers
• Shower Heads
• Pressure Gauges/Sensors
• Pipe Fittings of all Kinds
• Cable Connectors Adjustment
• Screws Door Closure
• Hardware Screws for Plastic Assembly
| Resin (anaerobic) | Acrylic |
| Colors | White or burnt orange |
| On-Part Life | 4 years, minimum |
| Toxicity | None |
| Material | K Value |
|---|---|
| Dry zinc phospate | 0.13 |
| Zinc phosphate/oil | 0.11 |
| Vibra-Seal on Dry zinc phospate | 0.11 |
| Vibra-Seal on Zinc phosphate/oil | 0.09 |